Alldo Tech CO2 laser engraving and marking machine for plastic, acrylic, wood, leather, stone etc.
Acrylic laser engraving machine is used for almost all engraving purposes on cast acrylics, when engraved, it produces a white, frosty look in contrast to the clear material using a CO2 laser. The laser engraving produces polished cutting edges and inner contours, no additional post-processing of the material is required.
There is a need to change the orientation of your laser to begin engraving from the bottom of the material upwards when using the acrylic laser engraving machine. This simple process will minimise the amount of particles being exhausted over previously engraved material which can re-deposit on the warm core and make cleaning difficult.
For a white engraving image using acrylic laser engraving machine: no Z-Offset and Air Assist on.
For a glossy-transparent engraving image using acrylic laser engraving machine: Z-Offset of + 1 mm and Air Assist off.
The quality of engraving is also affected by the purity of the acrylic. Cheaper acrylic doesn’t usually engrave very clean due to inconsistent melting points over the sheet material.
A common laser engraving technique on clear (cast) acrylic is to mirror the engraving on the back side of the perspex. This produces a ‘look through effect’ from the front of the surface. Your material has to be reversed prior to starting an engraving job like this.
Provide you with one-to-one sample testing service to check the quality of our equipment
The split co2 laser marking machine is designed for clearly marking acrylic and other nonmetal materials. It is suitable to meet high marking demands during productions. With the use of this laser, markings are permanent.
Marking with a flying co2 laser marking machine stands out whatever making that is done on acrylic and other materials. A flying co2 laser machine is affordable and durable for all. Marking done cannot be erased.
The stationary co2 laser marking machine can mark acrylic, other nonmetals and some metals without any hitches. Once marking is done on any material, erasing or wearing off is impossible. It is affordable to acquire.
Sales Engineer
Achieving a marking speed of 8000mm per second, the marking will not freeze, and its stability.
Alldo Tech is a manufacturer with a competitive price and accepts worldwide agents.
The standard equipment configuration can achieve a marking depth of 0.6mm.
It has no consumables, the parts have a long service life and require almost no maintenance.
Alldo Tech CO2 lasers do a good job in the non-metal engraving process. Our lasers are not expensive, hence an economical way of starting or expanding your business. The lasers have high quality engraving effects with excellent precision.
Very easy to start and operate, should you have any challenge, our phone lines are always available to answer your questions relating to your engraver. Our CO2 engravers are user friendly and have a safe and efficient working process.
Turnkey Project
Global Dealers
Satisfied Clients
"
EN 
ES 
AR 
RU 
PT 
FR 